NeuraCharge™ forecasts grid peaks, reads live market prices and dispatches your batteries, generators, solar and flexible loads automatically, behind the meter or in front of it. Lower demand charges, earn program revenue and keep critical loads online, with a 24/7 NOC behind you.
GridBattery System 1Battery System 2Battery System 3Generator 1Solar ArrayFacilityFeeder Meter
Battery systemsIdle
Sample data: when a peak window opens, the batteries discharge and grid draw falls below facility load, then recharge off-peak.
How it works
From grid signal to dispatched asset in four steps
NeuraCharge™ sits between the market and your equipment. It watches, forecasts, decides and acts, and keeps a record of every move.
01ConnectBatteries, generators, PV, HVAC and meters connect over Modbus TCP, SEL RTAC or your existing EMS, SCADA, BMS and PLC systems. No rip-and-replace.
02ForecastpTrack® predicts coincident peaks, prices and system demand up to 12 days ahead, with live IESO, AESO and PJM signals.
03DispatchThe optimizer stacks up to five programs by value and dispatches each asset within its limits, automatically or with a manual approval step.
04ReportEvery event is logged. Savings, program revenue and asset health land in plain-English reports for finance, operations and compliance.
Core capabilities
One control layer for every distributed energy resource
Monitor, dispatch and optimize batteries, generators, solar, HVAC and flexible loads across every site from a single platform.
Fleet-wide dashboard
One view of every asset and every site: batteries, generators, PV, HVAC and metered loads, with live status, health and dispatch state.
Remote and local dispatch
Automate dispatch from the cloud or trigger it manually. On-site controllers keep running if connectivity drops, so stability logic never depends on the cloud.
AI-optimized dispatch engine
Predicts peaks, then schedules and reacts in real time to grid signals and market prices to capture coincident-peak savings, demand response, energy arbitrage and ancillary services such as operating reserves.
Live market data
Real-time prices, dispatch signals and peak forecasts from IESO, AESO, PJM and other markets feed every decision the engine makes.
Network Operations Center (NOC)
Optional 24/7 managed operations. Our team monitors your assets, handles dispatch and grid response, and escalates incidents, so you get the results without the oversight.
API-first integration
Connects to your existing EMS, SCADA, BMS or PLC systems and exposes a clean API for your own tools. No rip-and-replace, and no extra hardware for most sites.
Behind or in front of the meter
One platform for every side of the meter
Industrial facilities cutting their bill and developers monetizing fleets run on the same engine. Pick your side.
For industrial, commercial and institutional facilities
Cut demand charges
Shift flexible loads off-peak, maximize self-consumption of on-site generation and shave costly demand peaks, automatically or with a manual approval step.
Earn program revenue
Enrol the same assets in demand response, coincident-peak programs and ancillary services. NeuraCharge™ stacks them by value and participates on autopilot.
See everything, stay in control
Real-time energy use, asset health and market conditions in one interface, with automatic or manual dispatch and no extra hardware for most sites.
Case Study
How Hydro Rein unlocked over $160K in energy value in year one
Hydro Rein runs a Tesla battery system at an aluminum extrusion facility in Ontario. With NeuraCharge™ dispatching the battery and Edgecom’s NOC operating it end to end, the site stopped relying on manual oversight, hit its Global Adjustment peaks and collected demand response payments on top.
Energy arbitrage, demand response, operating reserves and capacity programs from one dispatch engine, prioritized by contract and by value.
Run the fleet from one place
Dispatch fleets of batteries, generators and other DERs across sites and markets. Set program priorities once and track performance at scale, without spreadsheets or phone calls.
Protect performance and contracts
Sub-second health data, predictive alarms and automated settlement-ready reports help you avoid penalties, extend asset life and prove compliance.
Front of the Meter
AI-driven energy asset management
Everything an operator needs to scale a portfolio: intelligent dispatch, real-time visibility and operations that run themselves.
AI-Driven DispatchAutomate responses to real-time market price signals for optimal returns.
Multi-Stream ParticipationGet simultaneous access to operating reserves, frequency regulation, and energy arbitrage.
Set Program PriorityAdjust up to five program priorities to achieve specific contract or financial objectives.
Predictive ForecastingLeverage Edgecom’s deep data science to predict market peaks and opportunities through predictive forecasting.
Unified Asset ManagementManage a variety of asset classes and sizable portfolios from a single central platform.
Advanced Health TrackingMonitor State of Charge, State of Health, and thermal parameters in real-time.
Proactive Risk MitigationGet sub-second data granularity to increase asset life and lower the risk of thermal runaway.
Intelligent AlertingInstant alerts when an asset deviates from its performance or safety limits.
Automated NOC ParticipationOpt into automated grid response managed by our Network Operation Center for total “peace of mind”.
Instant Financial ReportingGenerate deep-dive reports on market participation and financial impact with a few clicks.
Fast API DeploymentDeploy rapidly without relying on bulky hardware or long customization cycles.
Manual Override ControlWith the ability to quickly transition between manual and automated modes, you can maintain ultimate control.
Use Case
Controlling a fully islanded Arctic mine microgrid
A remote mine in Canada’s Northwest Territories, reachable only by winter road and air, is retiring most of its diesel fleet in favour of wind, solar and a utility-scale battery plant. With no grid behind it, the battery has to hold the plant up on its own. NeuraCharge™ delivers the control layer that makes that possible.
The site
Wind, solar and storage, with diesel kept only for base load and contingency
Variable renewable output must be firmed on site, every hour of the year, at −40 °C.
9 MWWind plant
3.5 MWpSolar array
~10 MWhLiquid-cooled LFP battery plant
−40 °CDesign ambient
01
Stability without inertiaWith the large diesel units retired, the battery becomes the grid-forming source: it sets voltage and frequency, provides synthetic inertia and droop, and rides through faults.
02
Black start and recoveryAfter a trip, the plant re-energizes the bus from the battery, resynchronizes generators and restores load in a deterministic sequence, not operator improvisation.
03
Diesel handoffGenerators ramp in and out against a battery that is already carrying the bus, with no circulating power, mode conflicts or state-of-charge collapse.
04
Arctic operationsA short construction window, remote engineering support, and a mine control system that keeps plant-level authority.
What Edgecom delivers
NeuraCharge™ control cabinet concept: redundant controllers, edge servers and UPS in one 24U enclosure.
01 · Deliverable
Battery plant controller
Redundant industrial real-time controllers for deterministic control
State-of-charge state machine, mode logic and setpoint validation
Stability logic stays local, independent of the cloud
02 · Deliverable
NeuraCharge™ EMS
Monitoring, analytics and event logging for the whole plant
Secure remote engineering support (VPN, MFA)
Supervisory only: dispatch targets, never the safety layer
03 · Deliverable
Integration and delivery
Mine DCS, battery BMS and PCS integrated over Modbus TCP
Witnessed FAT, SAT and SIT test scripts
Training, documentation and first-year support
Hardware, software, testing, support. One supplier for the controller, the EMS and the integration. One accountable party on site.
Project details simplified for publication. Site identity withheld at the owner’s request.
Powered by Edi
Coordinate every asset with Edi
Edi, Edgecom’s agentic AI energy manager, connects dispatch signals to your batteries, generators and microgrid controls, with logging and reporting built in.
Dispatch triggersRespond to grid and program dispatch signals as soon as they arrive.
Multi-site deploymentDeploy the same workflow across every site and asset in your portfolio.
Event log and AI summariesAuditable records and plain-English portfolio summaries for clients and compliance.
No code required. Start from a template, test it with Simulate Before Deploy, and go live in under 30 minutes.
Edi™ workflow ·
Succeeded
Sample workflow. Built in Edi by drag and drop or described in plain English.
Platform depth
Everything under the hood
Market programs, dispatch control and asset visibility, built into one platform rather than bolted on.
Market signalIllustrative: price signal, peak threshold, and a 5-program priority stack.
Market Program Participation EngineResponds to real-time peak events and pricing signals, reducing peak demand charges.
Energy Arbitrage OptimizationCharges/discharges batteries based on real-time and day-ahead market prices.
Customizable Program PrioritizationSet and stack up to 5 grid programs based on financial goals or contract obligations.
Advanced ForecastingUp to 12-day predictive dispatch using AI for peak events, energy pricing, and system demand.
Fleet dispatchIllustrative: one control layer dispatching every asset, automatic or manual.
Asset-Level MonitoringReal-time data visibility for batteries, HVAC, compressors, cold storage, boilers, and more.
Health Metrics for BatteriesTrack state of charge, temperature, cycles remaining, and state of health to prevent degradation.
Custom AlertsGet notified when assets operate outside expected parameters to catch issues early.
Flexible Control ModesToggle between automatic and manual dispatch for different load types and schedules.
Modular, Site-Agnostic ControlEasily scales across geographies with custom scheduling and site-level autonomy.
Asset healthIllustrative values, not customer data.
Single Dashboard ViewReal-time monitoring of energy usage, DER performance, and environmental conditions.
Network Operations Center (NOC)An optional managed service to handle dispatch and grid response, ensuring reliability with minimal effort.
Incident & Financial ReportsClear, actionable insights into energy performance and savings, automatically generated.
Battery Health & Safety MonitoringContinuous tracking of SoC, temperature, capacity cycles, and fault detection.
Anomaly Detection & Root Cause AnalysisIdentifies underperformance or compliance issues before they escalate.
Regulatory AlignmentMeets ISO, NERC, IEEE 1547, and NIST 800-53 standards for energy markets and cybersecurity
Microgrids
When the grid fails, your microgrid control system shouldn’t.
The same NeuraCharge™ platform runs full microgrid control: EMS, SCADA, and MPC in one. Operate island, grid-tied, or hybrid, and keep critical loads online when the grid goes down.
<1sData Granularity
24/7NOC Monitoring
5Stackable Program Priorities
100%ISO 27001/NIST 800-53 Compliant
Resilience. Without Compromise.
Keep critical loads online during grid failures. NeuraCharge™ automatically islands your microgrid and coordinates assets to maintain power continuously.
Automated island mode detection and switchover
Local autonomous response to voltage and frequency events
Emergency Stop (E-Stop) and automated fire suppression integration
Redundant communication paths with secure remote access
Battery energy storage, backup and prime generators, solar PV and inverters, HVAC and refrigeration, EV charging and other flexible industrial loads. Assets connect over standard protocols such as Modbus TCP, or through your existing EMS, SCADA, BMS or PLC.
Do I have to replace my existing EMS, SCADA or BMS?
No. NeuraCharge™ is API-first and sits alongside what you already run. Your plant control system keeps plant-level authority; NeuraCharge™ sends dispatch targets and reads back status. Most sites need no additional hardware.
Which markets and programs are supported?
Live market data and dispatch signals from IESO (Ontario), AESO (Alberta) and PJM, covering coincident-peak programs such as Global Adjustment, demand response, energy arbitrage and ancillary services. Up to five programs can be stacked and prioritized by value or contract obligation.
What happens if the cloud connection drops?
Stability and safety logic runs locally on site controllers and does not depend on the cloud. Dispatch targets are supervisory. If connectivity is lost, local control continues and the cloud resynchronizes when it returns.
Can Edgecom operate the system for us?
Yes. The optional Network Operations Center (NOC) is a 24/7 managed service that monitors assets, handles dispatch and grid response, and escalates incidents, so your team gets the savings without the day-to-day oversight.
How is the platform secured?
NeuraCharge™ is built to ISO 27001 and NIST 800-53 controls, with secure remote access (VPN, MFA), redundant communication paths and auditable event logs for every dispatch action.